MICROHARDNESS DISTRIBUTION AT INTERFACE OF(N~++IP)-TiN COMPOSITE COATINGS ON STEEL

Abstract

Abstract: The composite coating of(N~++IP)-TiN was prepared by ion-plated TiN film onto ion-nitrided case on the low carbon steel substrate.The microhardness measurement along in- terface between IP-TiN coating and substrate was detected as a moderate decrease in magni- tude with increase of distance from the coating surface.This seems due to the occurrence of ion nitride case,ε-Fe_3N-Fe_2N and Fe_4N phases,along the interface.

Key words: microhardness, composite coating, interface, ion-plating, ion

JIN Zhujing YU Li YU Zhiming DAI Shaoxia XU Jiayin Institute of Corrosion and Protection of Metals,Academia Sinica,Corrosion Science Laboratory Academia Sinica,Shenyang,China. MICROHARDNESS DISTRIBUTION AT INTERFACE OF(N~++IP)-TiN COMPOSITE COATINGS ON STEEL[J]. Acta Metallurgica Sinica (English Letters), 1992, 5(8): 110-113.

[1]	Shang Zhao, Zhaolin Wang, Mingliang Wang, Zeyu Ding, Yiping Lu. A critical review of advances and application prospects of soft magnetic high entropy alloys [J]. Metals Advances, 2026, 40(2): 1-7.
[2]	Shiqing Wang, Hao Cheng, Xiangru Li, Bo Song, Yusheng Shi. 4D printing of shape memory alloy metamaterials: Mechanisms, structures, and applications [J]. Metals Advances, 2026, 40(2): 8-25.
[3]	Lei Chen, Gang Qin, Yao Chen, Qi Wang, Liang Wang, Yanqing Su, Ruirun Chen. Machine learning-assisted design of lightweight refractory high-entropy alloys: A comprehensive review [J]. Metals Advances, 2026, 40(2): 26-47.
[4]	Wei-Peng Chen, Jia-Qi Pei, Hua Hou, Yu-Hong Zhao. Phase-field simulation of α-Mg dendrite growth in magnesium alloys: A review [J]. Metals Advances, 2026, 40(2): 48-61.
[5]	Mengyao He, Shuhui Hao, Huichao Duan, Rui Zhang, Chuanyong Cui, Kui Du. Deformation twinning in a wrought Ni-base superalloy at intermediate temperatures [J]. Metals Advances, 2026, 40(2): 71-77.
[6]	Xinqi Ji, Yue Zhang, Wenhan Jin, Xin Qi. A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature [J]. Metals Advances, 2026, 40(2): 78-87.
[7]	Peng Liu, Hongliang Liu, Jun Liu, Chaoyun Yang, Hang Liu, Chengwu Zheng, Yikun Luan, Mingguang Li, Dianzhong Li. Manipulating the texture configuration and formability of interstitial-free steels through low-oxygen rare earth addition [J]. Metals Advances, 2026, 40(2): 101-109.
[8]	Xuhui Liu, Zijin Xiao, Yang Yuan, Qihong Huang, Kaiwei Tang, Yilong Dai, Dechuang Zhang, Jia She, Feng Peng, Fugang Qi, Xiaoping Ouyang. Corrosion-resistant and bioactive FeMn-CaP-Col@CS coating on magnesium alloy for orthopedic implants: Fabrication and characterization [J]. Metals Advances, 2026, 39(1): 1-12.
[9]	Lei Qin, Shengfeng Zhou, Jianbo Jin, Huan Yang, Kunmao Li, Cheng Deng, Yujie Yuan, Seyed Reza Elmi Hosseini, Lai-Chang Zhang. Effect of molybdenum content on the microstructure and tribological properties of Ti-Nb-Cu alloys produced by LPBF additive manufacturing [J]. Metals Advances, 2026, 39(1): 13-25.
[10]	Zhizhi Wang, Pei Liu, Jingyi Guo, Yiwen Yan, Aiqin Wang, Jingpei Xie. Excellent mechanical properties and biocompatibility of Ti-15Mo alloy via interstitial nitrogen atoms [J]. Metals Advances, 2026, 39(1): 38-46.
[11]	Eman Hassna, Yuxin Huang, Tingting Yan. Biodegradable metals for cardiovascular and orthopaedic implants: A comparative review of magnesium, iron and zinc [J]. Metals Advances, 2026, 39(1): 68-82.
[12]	Shuai Hao, Xiang-Mei Wen, Jun Cheng, Xue-Yan Yao, Wei-Ying Huang, Rui-Feng Li, Liang-Yu Chen. Tailoring corrosion resistance of laser powder bed fusion produced Ti-6Al-4V via heat treatment at 700 °C in potential biomedical applications: Microstructural evolution and electrochemical behavior [J]. Metals Advances, 2026, 39(1): 83-94.
[13]	Author links open overlay panelXiaodong Yang, Chang Liu, Lechun Xie. Surface engineering of medical titanium alloy: A review [J]. Metals Advances, 2026, 39(1): 95-116.
[14]	Huihui Wang, Qianying Guo, Chong Li, Lei Cui, Yiming Huang, Yongchang Liu. Effect of Ti₂AlC Addition on the Microstructure and Mechanical Property of Additive Manufactured Inconel 718 Alloys via Laser Powder Bed Fusion [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1481-1498.
[15]	Yuanyuan Feng, Jianchao Pang, Xiaoyuan Teng, Chenglu Zou, Jingjing Liang, Yuping Zhu, Shouxin Li, Jinguo Li, Zhefeng Zhang. Quasi-in-situ EBSD Study on the Microstructure and Tensile Properties of Selective Laser Melted Inconel 718 Alloy Processed by Different Heat Treatments [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1499-1512.

MICROHARDNESS DISTRIBUTION AT INTERFACE OF(N~++IP)-TiN COMPOSITE COATINGS ON STEEL

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments