| [1] |
Xinqi Ji, Yue Zhang, Wenhan Jin, Xin Qi.
A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature
[J]. Metals Advances, 2026, 40(2): 78-87.
|
| [2] |
Xiaolong Pei, Hua Hou, Yuhong Zhao.
A Review of Intelligent Design and Optimization of Metal Casting Processes
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1293-1311.
|
| [3] |
Tianyi Zeng, Zirui Luo, Hao Chen, Wei Wang, Ke Yang.
Flow Behavior and Dynamic Recrystallization Mechanism of CSS-42L Bearing Steel During Hot Compression Deformation
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 465-480.
|
| [4] |
Di An, Ruizhi Wu, Xiang Wang, Legan Hou, Xiaochun Ma.
Influence of Zn and Y on Hot Compression Behavior of Mg-Li-Zn-Y Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2134-2144.
|
| [5] |
Ruoyu Di, Yonghua Sun, Runhua Yao, Sen Pei, Xiaohong Yao, Ruiqiang Hang.
Preparation of TiO2 Nano-Flower Coating on Ti Substrates with Good Physical Sterilization Effect and Biocompatibility
[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1581-1589.
|
| [6] |
Jingjing Peng, Jing Liu, Shen Zhang, Zhihui Wang, Xian Zhang, Kaiming Wu.
Effects of Environmental Factors on Corrosion Behavior of E690 Steel in Simulated Marine Environment
[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(4): 678-694.
|
| [7] |
Wenyu Li, Weiming Yang, Mingze Li, Xiang Zhang, Ping Zhang, Yucheng Zhao, Peijian Chen, Haishun Liu.
Energy Absorption by 3D-Printed Mesh Structures with a Negative Poisson’s Ratio
[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(1): 205-212.
|
| [8] |
Kai Wang, Zhenjiang Wang, Jinling Lu, Zhijun Wang, Wei Wang, Xingqi Luo.
Erosion Behavior of NiCoCrFeNb0.45 Eutectic High-Entropy Alloy in Liquid-Solid Two-Phase Flow
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(8): 1266-1274.
|
| [9] |
Ming-Jie Zhao, Liang Huang, Chang-Min Li, Jia-Hui Xu, Xu-Yang Li, Jian-Jun Li, Peng-Chuan Li, Chao-Yuan Sun.
Investigation and Modeling of Austenite Grain Evolution for a Typical High-strength Low-alloy Steel during Soaking and Deformation Process
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(6): 996-1010.
|
| [10] |
Peng Gong, Ying-Ying Zuo, Shu-De Ji, De-Jun Yan, Deng-Chang Li, Zhen Shang.
Non-keyhole Friction Stir Welding for 6061-T6 Aluminum Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(5): 763-772.
|
| [11] |
Yan-Yi Xu, Jing Zhao, Chun-Yang Ye, Yan-Ping Shen, Xin-Cheng Miao, Yun-Hu Zhang, Qi-Jie Zhai.
Distributions of Electromagnetic Fields and Forced Flow and Their Relevance to the Grain Refinement in Al-Si Alloy Under the Application of Pulsed Magneto-Oscillation
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(2): 254-274.
|
| [12] |
Hao Su, Chuansong Wu.
Numerical Simulation for the Optimization of Polygonal Pin Profiles in Friction Stir Welding of Aluminum
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(8): 1065-1078.
|
| [13] |
Xuejian Lin, Hongjun Huang, Fuyu Dong, Yue Zhang, Xiaoguang Yuan, Bowen Zheng, Xiaojiao Zuo.
Hot Deformation Behaviors in Ti-6Al-4V/(TiB+TiC) Composites
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(12): 1747-1757.
|
| [14] |
Kwang-Su Kim, Lin-Xiu Du, Hyo-sung Choe, Tae-Hyong Lee, Gyong-Chol Lee.
Influence of Vanadium Content on Hot Deformation Behavior of Low-Carbon Boron Microalloyed Steel
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 705-715.
|
| [15] |
Haoqiang Zhang, Xixi Niu, Zhiliang Pei, Nanlin Shi, Jun Gong, Chao Sun.
Effects of Cr and Al Contents on the Preparation of SiC Fiber-Reinforced NiCrAl Alloy Matrix Composite
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1416-1422.
|
WeChat
