NUMERICAL SIMULATION METHODS AND THEIR APPLICATION IN MATERIAL HOT-WORKING

Abstract

Abstract: With the development of modern science and technology, especially computer science, the numerical simulation method has been widely used in material hot-working. Mary achievements have been made in this field by using the numerical simulation method. The numerical simulation method, especially finite element method fully described in this paper.Applications of the numerical simulation method in material hot-working are also discussed. Finally, the future of the numerical simulation method is outlined.

Key words: numerical simulation, material, hot-working

J. T. Niu, H. T. Li, X. D. Meng and P. Karjaleinen 1) Analysis and Measurement Center, Harbin Institute of Technology, Harbin 150001, China 2) Department of Mechanocal Engineering, The University of Oulu, Finland. NUMERICAL SIMULATION METHODS AND THEIR APPLICATION IN MATERIAL HOT-WORKING[J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 494-501.

[1]	Shiqing Wang, Hao Cheng, Xiangru Li, Bo Song, Yusheng Shi. 4D printing of shape memory alloy metamaterials: Mechanisms, structures, and applications [J]. Metals Advances, 2026, 40(2): 8-25.
[2]	Xinqi Ji, Yue Zhang, Wenhan Jin, Xin Qi. A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature [J]. Metals Advances, 2026, 40(2): 78-87.
[3]	Kunmao Li, Shengfeng Zhou, Jing Liu, Feng Yang, Chengliang Yang. A review on the biomedical Ti-Cu alloys: Design, preparation, microstructure and properties [J]. Metals Advances, 2026, 39(1): 47-67.
[4]	B. M. Shi, Y. T. Pang, B. H. Shan, B. B. Wang, Y. Liu, P. Xue, J. F. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Behavior of (B₄C+Al₂O₃)/Al Friction Stir Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1513-1526.
[5]	Xiaolong Pei, Hua Hou, Yuhong Zhao. A Review of Intelligent Design and Optimization of Metal Casting Processes [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1293-1311.
[6]	Yong Hou, Haiyu Liu, Yao Wang, Yu Zhang, Yayun Zhang, Feng Liu. Thermo-Kinetic Understanding of the Correlation Between Austenite Reverse Transformation and Mechanical Properties for Medium Manganese Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1195-1206.
[7]	Haolin Ye, Chongjian Zhou. Low Thermal Conductivity Contributes to High Thermoelectric Performance: A Review [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(5): 720-732.
[8]	Ze Li, Xing Yang, Tian-En Shi, Wang-Qi Bao, Jing Feng, Zhen-Hua Ge. One-Step Carrier Modulation and Nano-Composition Enhancing Thermoelectric and Mechanical Properties of p-Type SnSe Polycrystals by Introducing Ag₉GaSe₆ Compound [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(5): 781-792.
[9]	Mi Qin, Bingqing Cao, Pan Zhang, Xuemei Zhang, Ziqi Han, Xiaohong Zheng, Xianlong Wang, Xin Chen, Yongsheng Zhang. Point Defects and Grain Boundaries Effects on Electrical Transports of PbTe Using the Non-equilibrium Green’s Function [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(5): 811-822.
[10]	Xicheng Guan, Zhiyuan Liu, Ni Ma, Zhou Li, Juan Liu, Huiyan Zhang, Hailing Li, Qian Ba, Junjie Ma, Chuangui Jin, Ailin Xia. High-Performance p-Type Bi₂Te₃-Based Thermoelectric Materials with a Wide Temperature Range Obtained by Direct Sb Doping [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(5): 849-858.
[11]	Jiaye Li, Xinyuan Zhang, Chunlei Shang, Xing Ran, Zhe Wang, Chengjiang Tang, Xiaohang Zhang, Mingshuo Nie, Wei Xu, Xin Lu. Reinforcement Learning in Materials Science: Recent Advances, Methodologies and Applications [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2077-2101.
[12]	Liang Liang, Huifang Pang, Renguo Guan, Wenbo Du, Minqiang Gao, Jin Zhang, Huan Ma. Electromagnetic Wave Absorption Performance of FeCoCrAl_0.4V_x High-Entropy Alloys by Adjusting the Amount of V Content [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2217-2227.
[13]	J. X. Cai, B. M. Shi, N. Li, Y. Liu, Z. G. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Effect of Al₂O₃ on the Mechanical Properties of (B₄C + Al₂O₃)/Al Neutron Absorbing Materials [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(8): 1411-1420.
[14]	Zeming Yuan, Chenxu Liu, Xiaoming Li, Yongqi Sui, Zhonggang Han, Tingting Zhai, Dianchen Feng, Yanghuan Zhang. Effect of Ball Milling Time on Microstructure and Hydrogen Storage Properties of Nd₅Mg₄₁Ni Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(7): 1201-1214.
[15]	Wenshuang Gu, Shuai Yang, Shiyi Zhang, Zhiliang Pei, Weihai Xue, Deli Duan, Jun Gong, Chao Sun. High-Speed Rubbing Behavior of Abrasive Coating Coated on Titanium Alloy Blade Tips [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(4): 749-762.

NUMERICAL SIMULATION METHODS AND THEIR APPLICATION IN MATERIAL HOT-WORKING

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments