J Mater Sci Technol ›› 1999, Vol. 15 ›› Issue (03): 245-250.

• Research Articles • Previous Articles     Next Articles

Study of Solidification Shrinkage of Ductile Iron in Dry Sand Molds

Jiarong LI, Baicheng LIU   

  1. Beijing Institute of Aeronautical Materials, Beijing 100095, China; Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
  • Received:1998-06-15 Revised:1998-08-16 Online:1999-05-28 Published:2009-10-10
  • Contact: Jiarong LI

Abstract: The effects of metallurgical and processing parameters on the formation of solidification shrinkage in ductile iron have been studied, considering the parameters of carbon equivalent, inoculation, casting modulus and pouring temperature within specific ranges of these variables. Based on the orthogonal experiments, the metallurgical and processing parameters of the minimum casting shrinkage and the maximum casting shrinkage were obtained, and the effects of metallurgical and processing parameters on the formation of shrinkage cavities and porosities in ductile iron castings were discussed. A regression equation relating these variables to the formation of shrinkage was derived based upon the orthogonal experiments conducted.

Key words: