Abstract:

Cold processing of magnesium (Mg) alloys is a challenge because Mg has a hexagonal close-packed (HCP) lattice with limited slip systems, which makes it difficult to plastically deform at low temperature. To address this challenge, a combination of annealing of as-cast alloy and multi-axial forging was adopted to obtain isotropic ultrafine-grained (UFG) structure in a lean Mg-2Zn-2Gd alloy with high strength (yield strength: ~227 MPa)-high ductility (% elongation: ~30%) combination. This combination of strength and ductility is excellent for the lean alloy, enabling an understanding of deformation processes in a formable high strength Mg-rare earth alloy. The nanoscale deformation behavior was studied via nanoindentation and electron microscopy, and the behavior was compared with its low strength (yield strength: ~46 MPa) - low ductility (% elongation: ~7%) coarse-grained (CG) counterpart. In the UFG alloy, extensive dislocation slip was an active deformation mechanism, while in the CG alloy, mechanical twinning occurred. The differences in the deformation mechanisms of UFG and CG alloys were reflected in the discrete burst in the load-displacement plots. The deformation of Mg-2Zn-2Gd alloys was significantly influenced by the grain structure, such that there was change in the deformation mechanism from dislocation slip (non-basal slip) to nanoscale twins in the CG structure. The high plasticity of UFG Mg alloy involved high dislocation activity and change in activation volume.

Key words: Magnesium alloy, Ultrafine-grained, Nanoscale deformation